All Tenders
Ministry of Railways
M G/RYPS N/AItems - High pressure thermo plastic jack hose with male end nipple connection.
Ministry of Railways
DIESEL/IZZATNAGAR N/AItems - SMOOTHING REACTOR SL-30 TO DRG NO. 0.TWD.075.001, ALT-7, CLW SPEC NO.TES.075.001 ALT NO.6,
Ministry of Railways
SD-CMD-SDAH-STORES N/AItems - Safety Helmet with rechargeable and detachable LED Headlight
Ministry of Railways
STORES N/AItems - TRANSCATHETER AORTIC VALVE IMPLANT SET CONSISTS OF THE FOLLOWING IN STERILE INDIVIDUAL PACK, (i) TRANSCATHETER HEART VALVE - 01 UNIT, IT SHOULD BE MADE OF BOVINE/PORCINE PERICARDIUM TRI LEAFLET VALVE, MADE OF MEDICAL GRADE ALLOY WITH HYBRID CELL DESIGN. IT SHOULD HAVE INTERNAL/EXTERANL PET SKIRTING OR BOTH. THE SIZE OF THE VALVE SHOULD RANGE FROM 20 MM TO 32 MM OR MORE. (ii) VALVE DELIVERY SYSTEM - 01 UNIT, THE VALVE SHOULD BE CRIMPED OR LOADED OVER THE DELIVERY SYSTEM PRIOR TO INSERTION INTO THE PATIENTS VASCULATURE. SHOULD BE 0.035 WIRE COMPATIBLE. (iii) BALOON DIALATION CATHETER - 01 UNIT, BALOON SIZE RANGES FROM 16 MM TO 25 MM WITH 30 MM LENGTH. THE BALLOON RBP SHOULD BE MINIMUM 6 atm. (iv) INTRODUCER SHEATH - 1 UNIT, SHOULD BE MINIMUM 14 FR AND LENGTH OF MINIMUM 30 CM COMPATIBLE WITH ALL VALVE SIZES. SHOULD HAVE HAEMOSTATIC VALVE AND SIDE PORT WITH THREE WAY. SHOULD BE COMPATIBLE FOR FEMORAL ARTERY SIZE RANGING FROM 5 MM TO 7 MM. (v) INFLATION DEVICE - 02 UNITS (30ML/40ML/60ML). (vi) SYRINGES 50 CC - 02 UNITS. THE FIRM SHOULD BE ABLE TO SUPPLY ANY SIZE OF VALVE, DELIVERY SYSTEM & BALOON SUITABLE FOR PATIENTS.
Ministry of Railways
RATNAGIRI-DIVISION-STORES N/AItems - Supply installation and testing of shadow less operation LED light at ARMV (Accident Relief Medical Van) Ratnagiri. Make Apex medical system. Technomed India. Standard steel. Toplux OR similar. As per specifications enclosed
Ministry of Railways
DLS/BGKT N/AItems - Set of flat split cotter and washer for hanger lever pin and equalizer of WAG9HC loco
Ministry of Railways
STORES N/AItems - FILTER ELEMENT Schunk Pt.No.909010008700.Spare parts of Pantograph. MAKE- SCHUNK or equivalent.
Ministry of Railways
LOWER PAREL N/AItems - STAINLESS STEEL CUP WASHER FOR ST 4.2 CSK SCREW.
Ministry of Railways
DLS/JHANSI N/AItems - GASKET SOAK BACK FILTER TO FLANGE-EDGE MOLDED TO BLW PART NO: 16170787 AS PER EMD PART/DRG NO: 40034622 Alt-Ab or Latest.
Ministry of Railways
ELSD/AJJ N/AItems - SET OF STAINLESS STEEL HEX HEAD BOLT M10X40 MM FULL THREADED A2-70 GRADE
Ministry of Railways
FEROZPUR DIVISION-ENGINEERING N/AItems - Heavy repair and replacement of doors and windows and Repair to corroded water supply pipeline & Cleaning of Jungle/Grass/Bushes wood/Sapling etc. from sides of approach roads and nearest staff quarter in colony no.1 to 4 at FZR and Repair and maintenance of Community hall at FZR in the jurisdiction of SSE/W/FZR under ADEN-1/FZR.
Ministry of Railways
MUMBAI/DIV N/AItems - RETURN AIR (NTC) TEMPERATURE SENSOR FOR 15 TR RMPU OF AC BHEL EMU
Ministry of Railways
DSL/KAZIPET N/AItems - Transformer oil storage tank with 32 mm dia I/O pipes
Ministry of Railways
ECSD/MOULALI N/AItems - Analog composite type constant load Shore -A Circular hardness tester for hard rubber, ebonite, plastics, graphite and Bakelite's, as per Latest Germans standard.1) Reading: 1 to 100 Shore A.2) Least count: 1 Shore A.. As per ASTM D 2240 With NABL calibration certificate. Make: Model: SHR-A YUZUKI TM. Make: Contech or Similar
Ministry of Railways
BHOPAL DIVISION-ENGG N/AItems - Provision of renovating strong room, AC room shed with flooring and roof water leakage treatment for stores of A.C. Loco shed Itarsi in connection with the work "ELS/ET-Improvement & Modernization of Infrastructure of ELS Store depot & office along with Electrical work".
Ministry of Railways
NAGPUR CR DIVISION-ENGINEERING N/AItems - A)Construction of CC pathway on both side of line No. RD-5 in connection with provision for development of infrastructure facilities for examination of MEMU rake at Amla station. B)Provision of Road ART at Amla station. C)Provision of Road ART at Wardha station.