All Tenders
Ministry of Railways
LPSTORES/RWP N/AItems - Hammering chisel round head for chipping.
Ministry of Railways
TM-MGS-ENGINEERING N/AItems - Ultrasonic Testing of SKV/AT welds with contractor's own weld tester and Operators on nominated routes of East Central Railway including hand probing (flange testing) of welds as per Indian Railway Standard Specification for Ultrasonic Testing of Rails/Welds, Revised-2020 (Document No. T-53) and Manual for Ultrasonic testing of Rails and welds, revised 2022 (with latest amendment) issued by RDSO.
Ministry of Railways
CH-GRC-STORES N/AItems - Running Contract for Mixture of soluble insulin aspart 50% + Protamine Crystalised insulin Aspart 50% or similar,3 ml.Flexpen.
Ministry of Railways
TINSUKIA/DIV N/AItems - supply of Notice board as per Annexure-I,II,III Make- self or similar
Ministry of Railways
EMDLS-RAIPUR-STORES N/AItems - 1/2 inch Flat Washer as per EMD Pt.No:6101229
Ministry of Railways
STORES N/AItems - Dummy Plug for Sand Ejector box for 3 Phase Locomotives
Ministry of Railways
ELSS/SRC N/AItems - Set of gauges for checking CBC, Knuckle and other part to tight lock coupler H-Type to RDSO Spec. No. RDSO.2011/CG-03 of october-2011.One set consisting of 06 gauge & reference as per APTA drawing type of gauge as follows: (1) Contour maintenance gauge (Knuckle profile gauge), APTA Ref. Drg. No.31000 - 01 No./Set (2) Alignment wing limit gauge, APTA Ref. Drg. No. 32600 - 01 No./ Set (3) Counter condemning limit gauge, APTA Ref Drg. No.34100-1 - 01 No./Set.[4] Vertical height alignment wing pocket and guard arm gauge (GO Gauge), APTA Ref. Drg. No.34100-4 - 01 No./Set.[5] knuckle nose wear and stretch limit gauge, APTA Ref. Drg. No.34100-2A - 01 No./Set. (6) Vertical height alignment wing pocket and guard arm gauge (No GO Gauge), APTA Ref. Drg. No.44250-5 - 01No./Set. Supply is with calibration certificate traceable to national standard / NPL standard, not of any other agency. Master are calibrated by NABL approved Labs. Make: PIE or similar in best quality for industrial use. The brand/make must be mentioned properly on supplied material.
Ministry of Railways
IZATNAGAR N/AItems - Vertical wear liner for centre pivot bottom of BOXNHL wagon as per RDSO drawing No. WD- 97049-S/3, Alt.11, Item No.4, Material and specification as per drawing.
Ministry of Railways
SWR-CENTRAL-HOSP-STORES N/AItems - NINTEDANIB 100 MG TAB/CAP.
Ministry of Railways
ALIPURDUAR DIVISION-COMMERCIAL N/AItems - Provision of Tea stall (Catering service) on General Minor Unit (GMU) under unreserved category at New Coochbehar (NCB) Railway station on PF-2-3 between pole no. 03 & 04 i.e OHE pole no. 126/1 to 126/2
Ministry of Railways
DELHI DIVISION-STORES N/AItems - 20 mm Strain Clamp Complete.
Ministry of Railways
STORES N/AItems - Set of "T" union female assly. comprising of 06 items with nominal Sizes, T union female assly. Size-15-21=03 nos, 12-17= 03 nos, 8-13=01 no, 21-27=05 nos, 26-34=02 nos, 33-42=02 nos Specification/Drg :- MGS drg.no. UT-4-2014-10 (SH-1& SH-2) with latest Alt
Ministry of Railways
WELS/KGP N/AItems - (1) 8 mm X 65 mm Hex head Screw with 2.5 mm dia. hole for split pin at the bottom of the screw, Qty. 01 No., (2) Hex Nut, Qty. 02 Nos., (3) Spring Washer, Qty. 01 No., (4) Split Pin (2.5 mm x 20 mm), Qty. 01 No. (5) Plain Washer, Qty. 01 Drawing No. : EMU / M-3-2-070, Alt. c, Item No. 2,3,4,5,6 or latest.
Ministry of Railways
STORES N/AItems - Driving axle (Rough Machined) for Driving Wheel & Axle for 'X' Class Loco
Ministry of Railways
STORES N/AItems - Bell Crank Lever Assembly LH for BOXNHL (BMBS) Wagon to RDSO's Drg. No. WD-08093-S/2, Alt-3
Ministry of Railways
VIJAYAWADA DIVISION-ELECTRICAL N/AItems - BZA Division - Provision of Additional lifts for Amrit Stations under Sr.DEN/East & Sr.DEN/North Jurisdiction including 10 years CAMC after 02 Years warranty period: Qty 15 Nos.